en-USro-RO

MICCRA GmbH

omogenizatoare

Kinematica’s batch and inline homogenizers / dispersers achieve fully reproducible results for emulsions, dispersions or cell disruption from lab- and pilot-scale to full-scale production. These homogenizers provide the desired mean particle size and uniform distribution according to the user’s requirements. The field of application is wide, including pharmaceutical, chemical, cosmetics, food and life science.

Kinematica invented the Rotor – Stator principle which is widely used in homogenizing systems. Have a look how it works here.


POLYTRON® laboratory line
Volumes: from 0.01 to 30'000 ml
Stator diameter: from 3 to 60 mm
Speed range: up to 30'000 rpm
Smooth start function, autoclavable dispersing aggregates

The POLYTRON® line systems produce fine dispersion, emulsion and homogenization, offering efficient disruption of the systems, reproducibility of the results and simple procedures.
Thanks to the broad range of dispersing aggregates, the POLYTRON® systems are suitable for various laboratory applications, including disruption of animal and human tissues, sample preparation for RNA and DNA extraction, disruption of fruits and vegetables samples, sample preparation in the waste water industry, pills disruption for content analysis in the pharma industry as well as making emulsions from oil and water. Various models are available, from handheld dispersers to powerful stand-dispersers.

Test POLYTRON® PT 3100D (volume 0.1ml - 10'000ml) in your lab! More information

MEGATRON® laboratory line
Throughput: up to approx. 11 l per min
Pressure: up to 6 bar (higher pressures on request)
Temperature: up to 90 °C
Speed range: up to 30'000 rpm (autoclavable version up to 18'000 rpm)
Product inlet: single-phase (standard) / multi-phase (with optional injector)
Single-stage, horizontal working chamber
Single-acting mechanical seal with pressureless quench system

When testing and optimizing formulas, high process safety is paramount. The MT3100 S2 enables processing of complex material systems with minimal loss of mass and minimal energy, leading to efficient and replicable results.

This miniature format production system allows for realizing your ideas under as realistic conditions as possible in small, economic quantities. During the subsequent scale-up process, the results can be replicated with larger Kinematica machines. More information

POLYTRON® pilot plant and production line
Batch size: from 30 to 40’000 ml
Stator diameter: up to 350 mm
Speed range: up to 24'000 rpm

Kinematica’s POLYTRON® batch series for pilot plant and production is ideal for applications up to 40 resp. 50 liters and for scale ups from research and development to pilot plant or small production scale processes. These units offer high versatility in the size and numbers of aggregates to be used, for laboratory, pilot plant and small production applications. This permits the direct comparison of results between the smaller and larger aggregates, facilitating the scale up decision.

Available models:
POLYTRON® PT 45-80 GT sample amount 0.1 - 30'000 ml
POLYTRON® PT 6100D sample amount 0.1 - 30'000 ml
POLYTRON® PT 7100 sample amount 200 - 40'000 ml
POLYTRON® PT-D 36-60 sample amount 0.10 - 50'000 ml More information

MEGATRON® pilot plant line
Throughput: up to approx. 75 l per min
Pressure: up to 6 bar (higher pressures on request)
Temperature: up to 90 °C
Speed range: up to 21'000 rpm
Single-stage, horizontal working chamber
Single mechanical seal
8 different rotor / stator generator variants

Kinematica’s MEGATRON® inline pilot plant system MT 5100 S2 enables processing of complex material systems with minimal loss of mass and minimal energy, leading to efficient and replicable results. This helps you realize your ideas under as realistic conditions as possible in small economic quantities. During the scale-up process, the results can be replicated with larger Kinematica machines. Depending on the material’s system, the components bind into the finest emulsions or suspensions with droplet or particle sizes down to a few microns, achieved by the machines’ high speed, the resulting peripheral tip speeds and precise rotor / stator geometry. More information

MEGATRON® LINE
Throughput: from 12 l/min up to 150‘000 l/h
Pressure: up to 6 bar (higher pressures on request)
Temperature: up to 90 °C (higher temperatures on request)
1- / 2- or 3-stage machines available
Single or double mechanical seal
Different dispersing generators for coarse up to finest results
High-quality energy efficient drive systems with optional speed controller
Different surface qualities available
Explosion-proof design

The MEGATRON® LINE includes multi-stage dispersing and homogenizing equipment for continuous and/or recirculating processing in production. The systems produce fine dispersion, emulsion and homogenization in flow and are suitable for various applications, including making of emulsion, juices and smoothies production, ice-cream production (with foaming machines), making for the creams in cosmetics and pharmaceutical industry. More information

MICCRA GmbH
Volume: 0,1 ml - 100 l
Diametru Stator: 5-40 mm
Lungime instrument: 115-420 mm
Domeniul de viteză: 8'800 - 39'000 rpm
Putere: 145-900 Watt More information

MICCRA GmbH
Capacitate: 5-45 l / min.
Diametru stator: 5-40 mm
Viteza periferică: 30-46 m / s
Vid: 1 mbar
Presiune maxima: 8-16 bar More information

MICCRA GmbH
Omogenizatoarele si agitatoarele pentru statiile pilot sunt disponibile pentru loturi (de până la 500 de litri), precum și pentru aplicații inline ( de proces) (până la un debit de 10 tone / oră) More information

MICCRA GmbH
Specialistii ART ofera solutii personalizate pentru procese și aplicații speciale More information